ID #1082

Reservation drives are getting 'Failed to power up' errors

When a ZFS service is running on a node in the cluster, that node will hold SCSI reservations on some of the zpool disks to prevent the other node from being able to access those disks. With some disk models, when the passive node reboots, it will no longer be able to access those reservation disks and will get the message:

Device … failed to power up

That node will then always get I/O error from those disks.

This can be fixed by adding an entry to /kernel/drv/sd.conf to disable the bootup power check for a specific disk model. The entry should be similar to:

sd-config-list= "SEAGATE ST2000NM0001","power-condition:false";

or if there are multiple disk models showing this behaviour:

sd-config-list= "SEAGATE ST2000NM0001","power-condition:false",
                "SEAGATE ST32000644NS","power-condition:false";

After sd.conf has been modified on both nodes, there should be no 'failed to power up' error on the next bootup and the passive node should be able to access the disks as expected (although it will still get 'reservation conflict' because the disks are still reserved).

Tags: -

Related entries:

Last update: 2015-04-02 11:45
Author: Matt
Revision: 1.2

{writeDiggMsgTag} {writeFacebookMsgTag} {writePrintMsgTag} {writeSend2FriendMsgTag} {writePDFTag}
{translationForm}
Please rate this FAQ:

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

You cannot comment on this entry