Navigation
14 users online | 14 Guests and 0 Registered
Most popular FAQs 
- Are there any guidelines for characteristics of the quorum ... (43090 views)
- COMSTAR Fibre Channel and Client Multipathing (28876 views)
- What does broken_safe and broken_unsafe mean and how do ... (23506 views)
- How do I Install the RSF-1 HA Plugin for ... (20945 views)
- What does mapmgr (V3.4.6.2) do and how do I ... (19525 views)
- What is COMSTAR/stmf and what is the Interchangeble Naming ... (18949 views)
- How do I configure RSF-1 with Solaris IPMP (18196 views)
- How do I configure COMSTAR iSCSI targets for fail ... (17996 views)
- Where can I find the RSF-1 Cluster Documentation? (14724 views)
- How do I configure COMSTAR Fibre Channel targets for ... (14589 views)
Latest FAQs
- Recommended /etc/system settings for ZFS-based clusters (2017-02-24 14:09)
- Tuning the Solaris 11.x swapfs_minfree parameter (2016-07-21 16:39)
- How do I secure the web GUI ? (2016-05-06 13:16)
- Reservation drives are getting 'Failed to power up' errors ... (2015-04-02 11:45)
- Special syntax when the machine name / vip starts ... (2014-12-03 15:33)
A
- Are there any guidelines for characteristics of the quorum drive, size, speed etc?
RSF-1 only requires a single small partition per zfs pool for heartbeating, 1Mb is more than sufficient (in fact it's generally configured to write to blocks ... - According to the RSF-1 Admin guide the port numbers for rsfnet and rsfreq are both 1195, is this a typo or are rsfnet and rsfreq really on the same port?
RSF-1 uses port 1195 for both TCP and UDP requests. The UDP port is used for heartbeat and cluster discovery packets, with the TCP port ... - Adding and Removing volumes.
Adding a volume To add a volume to the cluster first select the Add a volume tab from the volume operations section. This presents a configuration ... - Advanced Operations
The Advanced Operations menu has a number of features accessed via a set of tabbed panels. The functionality of each of these panels is described ...